Skip to content
Navo24Navo24
Checkable freight facts for reporters

Media and influencers.

Journalists, analysts and creators who cover shipping need facts they can check: where a ship is, what a lane costs, how reliable a carrier is. Navo24 gives that data and plain-language explanations of the terms behind it.

Man in black jacket holding camera during daytime

Overview

Most freight stories are ocean container stories. Boxes in 20 ft and 40 ft ISO sizes, counted in TEU, travel on container ships from feeders under 1,000 TEU to ultra large vessels above 20,000 TEU, calling at hubs such as Singapore, Rotterdam and Shanghai. Bulk carriers and tankers move commodities on charters, while high-value and urgent goods fly on air waybills. Every ship broadcasts its position by AIS, and the voyage itself is described in schedules, bills of lading and port notices.

Stories go wrong where sources meet. A ship name can match several vessels, and only the IMO number is unique. AIS shows where a ship is, but the arrival time is usually typed in by the crew. Rate figures differ by index, lane, container size and date, and a headline number may be a spot quote rather than a contract price. Data with its source and date attached closes that gap.

What goes wrong today

01

Breaking news, no fast check

A grounding, a strike or a fire at a terminal spreads within minutes, and the first reports often name the wrong ship or port. You need the IMO number, vessel type, size and last known position before you publish.

02

Jargon readers cannot follow

Terms such as TEU, THC, demurrage, blank sailing and transshipment are used loosely in press releases. A short, correct definition tied to the real document or charge saves a correction later.

03

Rate claims without a source

A figure per 40 ft container means little without the lane, date, container size and whether surcharges are included. Indicative ocean rates and their history give you context rather than a single number.

04

Reliability claims that conflict

Two reports can give different on-time rates for the same trade because they measure different things, such as arrival at port or delay against the published schedule. You need to know the method before quoting a percentage.

What Navo24 gives you

Vessel Library

Identify the right ship in seconds

Search the Vessel Library by name, IMO number or MMSI and see the ship type and last known AIS position. This avoids confusing sister ships and vessels that share a name.

  • Search by name, IMO or MMSI
  • Last known AIS position
  • Ship type and size at a glance
Open Vessel Library
World Sea Ports

Check a port before you write about it

World Sea Ports lists depths, maximum vessel size, berths and facilities for more than 2,900 ports. It shows whether a terminal can handle the ship in your story and what equipment it has.

  • Channel and berth depths
  • Maximum vessel size per port
  • UN/LOCODE for every port
Open World Sea Ports
SchedulesMCP

Cite carrier reliability with context

SchedulesMCP covers more than 72,000 sailings with cut-offs, transshipment points and carrier on-time reliability. You can see what was published and compare it with how carriers actually performed.

  • Published sailings and cut-offs
  • Carrier on-time reliability
  • Transshipment points shown
Open SchedulesMCP
FreightRatesMCP

Put a lane price in perspective

FreightRatesMCP gives indicative ocean FCL lane rates and rate history. Charts of how a lane moved over time are easier to defend than a single quote.

  • Indicative FCL lane rates
  • Rate history by lane
  • Clear label: indicative, not a quote
Open FreightRatesMCP

How it works with Navo24

  1. Identify the ship or port

    Look up the vessel by IMO number or the port by UN/LOCODE so you are writing about the right one.

  2. Check position and capability

    Read the last known AIS position, the ship type and the port depth and berth data.

  3. Add schedule and rate context

    Compare the published sailing and carrier reliability, and set the lane price against its history.

  4. Define terms and cite sources

    Link the glossary or reference page for each term and note the date of the data you used.

Rules and standards that apply

UN/LOCODE

The five-character UN location code, such as GBFXT for Felixstowe, names a port unambiguously when town names repeat.

IMO ship identification number (SOLAS Chapter XI-1)

The seven-digit IMO number stays with a ship through renames and flag changes, so it is the safest way to identify a vessel.

AIS under SOLAS Chapter V

Ships of 300 gross tonnage and above on international voyages must carry AIS, but destination and ETA fields are entered by the crew.

ISO 6346

The container number format of owner code, category letter, serial number and check digit lets you verify that a quoted box number is valid.

DCSA track and trace event standards

Standard event names explain why two trackers can show different statuses for the same container.

Questions

How do I find out where a ship is?

Search the ship by name, IMO number or MMSI in the Vessel Library to see its last known AIS position. Always note the time of that position, because AIS data is a snapshot and may be hours old for ships out of coverage.

What does TEU mean?

TEU stands for twenty-foot equivalent unit, the standard measure of container capacity. A 20 ft container is one TEU and a 40 ft container is two TEU, so a 20,000 TEU ship can carry the equivalent of 20,000 twenty-foot boxes.

What is the difference between demurrage and detention?

Demurrage is charged when a full container stays in the port or terminal beyond the free time. Detention is charged when the container is kept outside the terminal beyond its allowed days. Both are set out in the carrier tariff.

Why do two sources give different freight rates for the same route?

Rates depend on the date, container size, whether surcharges are included and whether the figure is a spot quote or a contract price. Different publishers also sample different shippers and ports, so always state the source and method when quoting a rate.

How can I check if a port can take a very large ship?

Check the port page for channel depth, berth depth and maximum vessel size, then compare them with the ship draft and length. Crane outreach at the terminal also limits how many container rows a ship can have across its deck.