Skip to content
Navo24Navo24

Melbourne rail station.

Melbourne has the UN/LOCODE GBMBE with the rail function. Below: the nearest station and its codes, track gauge and electrification, freight yards and terminals nearby and nearby rail locations.

GBMBE1435 mmNot electrified

About Melbourne

Melbourne (UN/LOCODE GBMBE) is a rail location in Derbyshire, United Kingdom. The nearest railway station on OpenStreetMap is Peartree, 9.37 km from the UN/LOCODE point, run by East Midlands Railway. The lines here use 1,435 mm (standard gauge) track and are not electrified. 5 freight yards and terminals are mapped nearby.

Nearest station

NamePeartree
TypeStation
Distance9.37 km from the UN/LOCODE point
OperatorEast Midlands Railway
Platforms2
Opened1 Jan 1890

Source: OpenStreetMap, Wikidata. The station name differs from the UN/LOCODE place name; it is the closest mapped station.

Photos of Peartree station

35003 Derby Shed
35003 Derby Shed by Phil Sangwell, CC BY 2.0, via Wikimedia Commons
Peartree ^ Normanton Station - geograph.org.uk - 1975630
Peartree ^ Normanton Station - geograph.org.uk - 1975630 by Peter Butterworth, CC BY-SA 2.0, via Wikimedia Commons
Peartree ^ Normanton Station - geograph.org.uk - 1975636
Peartree ^ Normanton Station - geograph.org.uk - 1975636 by Peter Butterworth, CC BY-SA 2.0, via Wikimedia Commons

Photos from Wikimedia Commons under free licences, credited under each photo: the station's own Wikidata image first, then photos taken within 600 m of the station.

Freight yards and terminals near Melbourne

5 mapped freight facilities, closest first. Names and types as tagged on OpenStreetMap; terminals with an operator page link to it.

FacilityTypeOperatorDistance, size
East Midlands Gateway Terminal DB Cargorail yard9.32 km
Litchurch Lane Worksrail yard10.09 km
Alstomrail yard10.4 km
Chaddesden Sidingsrail yard11.55 km
Toton Sidingsrail yard14.96 km

FAQ

What is the UN/LOCODE of Melbourne?
The UN/LOCODE of Melbourne is GBMBE: GB for United Kingdom and MBE for the place. The code carries the rail function (2), so it is used in rail consignment notes and rate requests.
What track gauge is used at Melbourne?
1,435 mm (standard gauge), from the tracks mapped at the station.
Is the railway at Melbourne electrified?
No, the lines at the station are tagged as not electrified on OpenStreetMap.